Skip to content

Linux Packages

Use the signed Delino repository at https://pkgs.oss.delino.io to install CLI tools with APT or DNF.

Supported systems

Package installation is verified on x86-64 and ARM64 for Ubuntu 22.04, 24.04 and 26.04 LTS; Debian 12 and 13; Fedora 43 and 44; and RHEL-compatible 9 and 10 systems, including UBI, Rocky Linux and AlmaLinux. This verifies package installation and version/help commands; each CLI may have narrower runtime requirements.

Runmoor's manager runs only on Ubuntu 22.04 or newer on Linux, on x86-64 or ARM64. Debian, Fedora, UBI, Rocky Linux and AlmaLinux can install the package and display its version, but cannot run the manager.

Runmoor 0.1.3 and CacheCow 0.1.0 native packages are available in stable. Other CLI examples apply after that CLI’s first verified native package release; check its installation guide for availability. binpm, cargo-mono, nodeup, with-watch, runmoor, clibox and ccow all use the stable channel. Preview is reserved and currently has no CLI packages. Package versions use the original CLI version followed by -1. Older releases published before native package support are unavailable through these repositories.

These APT and DNF repositories do not support Arch Linux or Alpine Linux.

Verify the repository key

Install your distribution's ca-certificates, curl and gnupg packages first. Download the public key and inspect its full primary fingerprint:

curl -fsSLo delino-packages.asc https://pkgs.oss.delino.io/keys/delino-packages.asc
gpg --show-keys --with-fingerprint delino-packages.asc

The RSA 4096 primary key fingerprint must be exactly:

B08D E37A 14DD 10DD FD04 E66E 87CB 82A1 F70F BD30

Stop if the fingerprint differs. Keep signature verification enabled when installing or updating packages.

APT: stable

Runmoor is distributed through the Delino repository. Downloading or inspecting the key alone does not register that repository with APT. After verifying the key, install it in a dedicated keyring and register stable:

sudo install -d -m 0755 /usr/share/keyrings
gpg --dearmor --output delino-packages.gpg delino-packages.asc
sudo install -m 0644 delino-packages.gpg /usr/share/keyrings/delino-packages.gpg
sudo tee /etc/apt/sources.list.d/delino.sources <<'EOF'
Types: deb
URIs: https://pkgs.oss.delino.io/apt
Suites: stable
Components: main
Architectures: amd64 arm64
Signed-By: /usr/share/keyrings/delino-packages.gpg
EOF
sudo apt-get update
sudo apt-get install runmoor
runmoor version

The source uses Signed-By to restrict this key to the Delino repository. The commands install the available Runmoor package; other stable CLI packages can use the same registration after their verified publication. APT also installs delino-archive-keyring, which keeps this repository’s public certificate current through authenticated package updates.

APT cannot find Runmoor

Unable to locate package runmoor means APT's local package lists do not contain Runmoor for the selected architecture. Inspect the architecture and the Delino source, then refresh the lists and check the candidate:

dpkg --print-architecture
cat /etc/apt/sources.list.d/delino.sources
sudo apt-get update
apt-cache policy runmoor
  • The architecture must be amd64 or arm64.
  • If the source file is missing, complete the key verification and APT stable registration above. An existing custom source file may use a different name; check its settings before adding a duplicate.
  • The source must use https://pkgs.oss.delino.io/apt, suite stable, and component main. Use the literal suite stable, not an Ubuntu codename such as jammy or noble. Preview has no Runmoor package.
  • The update must fetch the Delino stable repository without errors. Resolve any reported network, certificate, or signature error before installing; do not disable signature verification.
  • The policy output must show a candidate from https://pkgs.oss.delino.io/apt. Once it does, run sudo apt-get install runmoor, then runmoor version.

DNF: stable

After verifying the same key, use the commands below to check package installation. Runmoor's manager requires Ubuntu and cannot run on these DNF distributions.

sudo rpm --import delino-packages.asc
sudo tee /etc/yum.repos.d/delino.repo <<'EOF'
[delino]
name=Delino stable
mirrorlist=https://pkgs.oss.delino.io/rpm/stable/$basearch/mirrorlist
enabled=1
gpgcheck=1
repo_gpgcheck=1
gpgkey=https://pkgs.oss.delino.io/keys/delino-packages.asc
metadata_expire=300
sslverify=1
EOF
sudo dnf install runmoor
runmoor version

The repository enables both gpgcheck=1 and repo_gpgcheck=1. If DNF requests a key confirmation, compare the fingerprint above before accepting.

Preview registration

Preview currently has no CLI packages. Runmoor uses stable; it does not require this additional repository.

Preview is an explicit opt-in and remains enabled for later updates. After the key setup above, register the additional source for your package manager.

APT:

sudo tee /etc/apt/sources.list.d/delino-preview.sources <<'EOF'
Types: deb
URIs: https://pkgs.oss.delino.io/apt
Suites: preview
Components: main
Architectures: amd64 arm64
Signed-By: /usr/share/keyrings/delino-packages.gpg
EOF
sudo apt-get update

DNF:

sudo tee /etc/yum.repos.d/delino-preview.repo <<'EOF'
[delino-preview]
name=Delino preview
mirrorlist=https://pkgs.oss.delino.io/rpm/preview/$basearch/mirrorlist
enabled=1
gpgcheck=1
repo_gpgcheck=1
gpgkey=https://pkgs.oss.delino.io/keys/delino-packages.asc
metadata_expire=300
sslverify=1
EOF
sudo dnf makecache

Runmoor and clibox

Use the stable registration above to install Runmoor 0.1.3 with APT or DNF. The same registration applies to clibox after its first verified native release. Check runmoor version or clibox --version. Native clibox installation does not require Node.js; desktop helpers remain optional user-installed tools.

Installation does not register or start a Runmoor service, configure runners, or install Docker or Tart. Follow the Runmoor guide for explicit setup and service commands. Package installation checks do not certify live GitHub or Tart integration.

Update and remove

For the installed Runmoor package with APT:

sudo apt-get update
sudo apt-get install --only-upgrade delino-archive-keyring runmoor
sudo apt-get remove runmoor

For DNF:

sudo dnf upgrade runmoor
sudo dnf remove runmoor

Removing a CLI package preserves its user configuration and data. Stop and unregister a Runmoor service with the documented Runmoor commands before removing the executable.

To stop receiving updates, remove the corresponding delino.sources or delino-preview.sources from APT's sources directory, or delino.repo or delino-preview.repo from DNF's repository directory. Remove the Delino APT keyring only when neither Delino source remains registered.

Keep delino-archive-keyring updated before a signing key expires. If a machine has been offline through a key change and APT cannot authenticate the repository, repeat the public-key download, full fingerprint check and keyring installation above, then run apt-get update. Never disable signature verification to recover.

CacheCow

CacheCow 0.1.0 packages named ccow are available in stable on amd64 and arm64. Use the stable registration above, then run sudo apt-get install ccow or sudo dnf install ccow, followed by ccow --version. Package installation on amd64/arm64 does not establish native CoW or process-lifecycle support. See CacheCow installation for runtime requirements, Homebrew, updates and removal. Installing a package does not activate tool shims or edit shell configuration.